Wi-Fi®

• Compliant to 1x1 IEEE 802.11 a/b/g/n, 802.11j (hosted mode) with single band and dual band support
• Support for 20 MHz and 40 MHz channel bandwidths
• Transmit power up to +20dBm1 with integrated PA
• Receive sensitivity as low as -97 dBm1
• Application data throughput up to 100 Mbps1 (Hosted Mode) in 802.11n with 40 MHz bandwidth and up to 50 Mbps1 with 20 MHz bandwidth
• Application data throughput up to 90 Mbps1 (Embedded Mode) with 40 MHz bandwidth and up to 40 Mbps1 with 20 MHz bandwidth
• Data Rates:- 802.11b: Upto 11 Mbps ; 802.11g/a:Upto54 Mbps ; 802.11n: MCS0 to MCS7

Bluetooth

• Compliant to dual-mode Bluetooth 5
• Transmit power up to +20 dBm1 with integrated PA
• Receive sensitivity:- LE: -96 dBm, LR 125 Kbps: -102 dBm1
• <5 mA1 transmit current in BT 5 mode, 2 Mbps data rate
• Data rates: 125 kbps, 500 kbps, 1 Mbps, 2Mbps, 3 Mbps
• Operating Frequency Range:- 2.402 GHz - 2.480 GHz
• EDR+2.1, 4.0, 4.1, 4.2 and 5.0
• BT LE 1 Mbps, 2 Mbps and Long Range modes
• Piconet and scatternet
• BT profile support2 for SPP, A2DP, AVRCP, HFP, PBAP, IAP, GAP, SDP, L2CAP, RFCOMM, GATT, IAP1, IAP2

RF Features

• Integrated baseband processor with calibration memory, RF transceiver, high-power amplifier, balun, T/R switch and flash memory
• Dual external antenna (diversity supported)

Operating Modes

• Hosted mode (n-LinkTM): Wi-Fi stack, Bluetooth stack and profiles and all network stacks reside on the host processor
• Embedded mode (WiSeConnectTM): Wi-Fi stack, TCP/IP stack, IP modules, Bluetooth stack reside in RS9116W; Some of Bluetooth profiles reside in host processor

Hosted Mode (n-LinkTM)

• Host interfaces: SDIO 2.0 and USB HS
• Host drivers for Linux, AndroidTM, and Windows®
• Support for Client mode, Access point mode, Wi-Fi Direct, Concurrent client and access point mode, Enterprise Security
• Support for concurrent Wi-Fi, dual-mode Bluetooth 5
• Support for multiple Virtual Access Points

Embedded Mode (WiSeConnectTM)

• Host interface: UART, SPI, USB HS, and USB HS CDC
• Support for Embedded Client mode, Access Point mode, Wi-Fi Direct and Enterprise Security
• Supports advanced security features: WPA/WPA2-Personal and Enterprise (EAP-TLS, EAP-FAST, EAP-TTLS, EAP-PEAP, EAP-LEAP, PEAP-MSCHAP-V2)
• Integrated TCP/IP stack (IPV4/IPV6), HTTP/HTTPS, DHCP, ICMP, SSL 3.0/TLS1.2, WebSockets, IGMP, DNS, DNS-SD, SNMP, FTP Client
• BT profile support2 for SPP, A2DP, AVRCP, HFP, PBAP, IAP, GAP, SDP, L2CAP, RFCOMM, GATT, IAP1, IAP2
• Wireless firmware upgrade and provisioning
• Support for concurrent Wi-Fi, dual-mode Bluetooth 5

Wireless Co-Existence Modes

• Wi-Fi Access Point with support for upto 8 clients + Wi-Fi Client
• Wi-Fi Access Point + BLE
• Wi-Fi Client + Bluetooth Classic (EDR v 2.1) , Wi-Fi Client + BLE

Security

• HW device identity and key storage with PUF
• Accelerators: AES128/256, SHA256/384/512, RSA, ECC, ECDH, RNG, CRC
• WPA/WPA2-Personal, WPA/WPA2 Enterprise for Client, EAP-TLS, EAP-FAST, EAP-TTLS, PEAP-MSCHAP-v2

Power Consumption

• Wi-Fi standby associated current of <90 uA1 for DTIM 3 (2.4 GHz)
• Wi-Fi TX current = 260 mA1 (6 Mbps, 20 dBm, 2.4 GHz), RX current = 30 mA1 (6 Mbps, 2.4 GHz)
• <7 mA1 transmit current in BT 5 mode, 0 dBm output power, 1 Mbps data rate Features www.redpinesignals.com Software and Regulatory Certifications
• Wi-Fi Alliance2
• Bluetooth Qualification2
• FIPS 140-2 Certification2
• Regulatory certifications (FCC, IC, ETSI/CE, TELEC)2 Operating Conditions
• Single supply: 3.3V or 1.85V
• Operating temperature: -40ºC to +85ºC (Industrial grade) Packages
• Module packages with and without antenna
• SoC packages: WLCSP and QFN Evaluation Kit:
• Single band P/N: RS9116X-SB-EVK1
• Dual band P/N: RS9116X-DB-EVK1

Wynik testów: układy RS9116 i RS14100 firmy Redpine Signals ocenione najwyżej