RHEA-I660A can be equipped with six 600F supercapacitors, combined under the power of 150W, with different backup time and different size solutions to meet the different needs of customers in different application scenarios.

Six of 3.0V/600F capacitors in series design (customized services for various series and parallel connections with different capacities can be provided), It can be used as a maximum load of 150W at a normal temperature of 25 degrees, providing 60 seconds of operation and safe shutdown time after the system is powered off. Maintenance-free long-life supercapacitors serve as efficient and long-lasting energy storage devices, providing uninterrupted power in short transition times and up to 500,000 charge and discharge cycles. Different from bypassing batteries that store energy through chemical reactions, supercapacitors are based on electrophysical principles and can be fully charged for use in a very short time. The service life of supercapacitors is ten times longerdisplay interface than that of traditional lead-acid batteries, and energy storage systems equipped with supercapacitors usually have high current carrying capacity, power density and reliabilit.

The supercapacitor backup board supports three input voltages of 12/19/24V ±10% , and the output voltage is consistent with the input voltage. The MCU control unit inside the product will monitor the status of the input voltage in real time, and provide a sevensegment digital tube to display the real-time voltage at the same time. The 7-segment digital tube provides two installation methods. By default, it is inserted into the supercapacitor backup board, or it can be installed on the panel selected by the customer through an accessory 50MM wire for external display.

The supercapacitor backup board is designed as a built-in board, providing a square-shaped input and output interface, and users can configure the input and output wires by themselves.

The supercapacitor backup board provides 2 groups of state relay switch signal outputs, which are configured to start after power failure (the start time can be configured), and users can mount switch signals of other devices, such as monitors, printers, or buzzers.

Features:

• six 3.0V/600F supercapacitors
• 12/19/24 VDC Adaptive input/output.
• maximum 150W load 3V@25°C lasting 60 sec
• the standard 60W load 3V@25°C lasting 180 sec
• -40°C to 60°C wide temperature environment
• 500,000 charge-discharge life cycles
• long supercapacitor lifetime, up to 10 years
• intuitive power management software for easier management
• provide power-off shutdown service through software/hardware

Specification:

• battery type: super capacitor
• capacitance: 6 x 600F@3V
• service life: >10 years (when the capacitor works at 3V and 25 temperature)
• life cycle: 500000 charge and discharge cycles
• input voltage: 12V or 19V or 24V ±10%
• the output voltage:
  • the output voltage is equal to the input voltage:
  • input 12V ±10%, output 12V
  • input 19V ±10%, output 19V
  • input 24V ±10%, output 24V
• output power: 150W
• light: green
• backup time:
  • 60 sec. (under 150W load at 3V@25°C)
  • 180 sec. (under 60W load at 3V@25°C)
• I/O interface:
  • 1 x LED display interface (2x10 Pin)
  • 1 x DC in (2x2 Pin)
  • 1 x DC out (2x2 Pin)
  • 1 x relay (1x6 Pin)
  • 1 x USB2.0 Type-A
  • 1 x debug (1x3 Pin)
  • 1 x FW flash (2x7 Pin)
  • 2 x power btn (1x2 Pin)
• protect:
  • reverse protection
  • overload protection
  • overvoltage protection
• dimensions: 166 x 90.5 x 82.6 mm
• weight: 0.9/1.2kg
• working temperature: -40ºC ~ 60ºC
• storage temperature: -40ºC ~ 70ºC