Innodisk 2.5” SATA SSD 3TO7 provides high capacity flash memory Solid State Drive (SSD) that electrically complies with Serial ATA (SATA) standard supporting up to SATA III standard (6.0Gb/s) speed and capable of achieving excellent performance with its 4 channels 4CE Innodisk ID301 controller. Besides outstanding balance of performance, rich form factors, capacity and customization flexibility, the key feature of InnoOSR family is the single-device, Firmware LBA level OS & Data back-up capability which enables on-site recovery of operating system by simple procedure such as GPIO triggering or application commands. Full Recovery, Just a Click Away.

Main feature of InnoOSR family is its OS back up and swift recovery mechanism, which allow field repair easier than ever for malfunction systems with software level damages. As shown in above picture, 2 x 2 pin headers located on the side of standard 7 + 15 pins SATA connector can be used to interact with firmware of InnoInnoAvice to perform OS recovery process and provide LED signal which indicates the recovery status. 

Features:

• The World’s First SSD Dedicates to System Recovery
• Firmware Level Back Up to Prevent Compatibility Issue
• Supports Hardware GPIO and Software Triggering
• Reserved GPIO Pins to Accommodate your System Design

Specification:

• interface: SATA III
• flash type: 3D TLC
• capacity 64GB
• flash endurance 3,000 P/E cycles
• max. channels: 4
• sequential R/W (MB/sec, max.): 560 / 330 MB/s
• 4KB Random (QD32) R/W (IOPS):  79,000/69,000
• max. power consumption: 3.5W
• thermal sensor
• ATA Security
• S.M.A.R.T.
• dimensions (WxLxH): 69.85 X 100.00 X 7.00 mm
• environment vibration: 20G @7~2000Hz
• shock: 1500G @ 0.5ms
• storage temperature: -55°C to +95°C
• operating temperature: 0°C to +70°C
• MTBF: 3 million hours